HUMIDITY CABINET(REFRIGRATED TYPE) – GUPTA BRAND 20009017

With forced air circulation, fitted with additional Refrigeration, System to obtain temp from 5° C to 50° C Accuracy ± 1° C and relative. Humidity 40to 95% . Accuracy ±3% for 230 V 50 Hz A.C. conforming to the latest standard. 455 x455 x 710 mm 605 x 605 x 605 mm 605 x 605 x 910 mm

Optional Accessries : Humidity Chamber can be supplied with Digital Humidity cum Temp. Controller

Download PDF

INCUBATOR – GUPTA BRAND 20009018

Double walled thermostatically controlled: Inner chamber made of Alluminium/stainless steel. Outer body is made of Mild Steel. Beaded heating Elements are placed under the ribs at the bottom and sides. Temperature Controlled by Hydraulic Thermostat from 10º C above ambient to 240º C. Dial setting approximate basis. Correct reading as per L- shape thermometer fitted on the front panel at the top. Suitable to work on 220 volt A.C supply.

Special Arrangements : Digital Temperature Controller , Alarm System , Timer, Blower

Available chamber size : (a) 12″ x 12″ (b) 14″ x 14″ (c) 18″ x 18″ (d) 24″ x 24″

Download PDF

INCUBATOR B.O.D LOW TEMPERATURE – GUPTA BRAND 20009019

This the most versatile low temperature indicator for biochemical oxygen demand determination. Caster wheel mounted cabinet is double walled with inner chamber Of anodized aluminum of stainless steel and outer casing of M.S. sheet duly painted. The gap of 75 m.m. between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses. Triple walled back of the unit is fitted with two air circulation fans for maintaining temperature uniform ally through the chamber. Heating elements of nicrome wire are placed in the air path and are duly insulated from the body. The inner chamber is ribbed for placement of shelves at desired height. Full view inner glass door permits inspection of specimens, without disturbing the same, lock and key arrangement Is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. The temperature range from 5 degree c to 50 degree c is controlled by two EGO/JUMO German double action hydraulic capillary thermostat. Refrigeration unit is formed by Hermetically sealed ISI marked SHRIRAM make compressor and the cooling coils are distributed all round the chamber and lie in the air circulation path. An l-shaped prismatic Thermometer is provided at the top on the front panel along with separate indicator lamps for mains, heating and incoming voltage. Supplied complete with 3 shelves, cord and plug to work on 220/230v A.C. supply.

Download PDF

INCUBATOR ECG – GUPTA BRAND 20009020

Outer wall is made up of M.S. sheet duly painted and inside of S.S. The gap between inner and outer wall is fitted with high grade mineral glass wool. Temp. range from ambient to 70 degree c. is controlled by JUMO/EGO GERMAN capillary type thermostat with an accuracy of +- 5 degree c. The unit is provided with manual titling device, so as to tilt the tray holding the eggs. To work on 220/230 volts A.C. supply.

OPTIONAL ACCESSORIES:

(a) Automatic water cut off device in case water supply is stoped.This is a solid state transistorized device which automatically keeps watch on regular supply of water in the flask and keeps the heaters On only when the water supply is normal. It automatically cuts OFF the supply of heaters from the mains when the water supply get disturbed and thus prevents the burning of heating element/melting of glass coil. Heaters would automatically be switched ON when the water comes to normal.

(b) Special grade rubber tumbling for connections (coil of 10 meters).

Download PDF

INCUBATOR ORBITAL SHAKING – GUPTA BRAND 20009021

The outer chamber is made of M.S. sheet duly painted and inner chamber of thick S.S. sheet. The gap between two walls is fitted with high grade glass wool to avoid thermal loss. The plexi glass window makes it possible to inspect the specimen without disturbing the inner temperature. The lid of chest type unit is fitted with flourocent tubes of 60 cm, length, on the inner side. The unit has a temperature range from 5 degree c to 60 degree c and is controlled with SOLID STATE DIGITAL TEMPERATURE INDICATOR-CUM-CONTROLLER with and accuracy of +- 0.5 degree c. When the tube lights are ON temperature range is from 1`0 degree c to 50 degree c. Air circulation fan is fitted to maintain temperature uniformity throughout. Cyclic illumination conditions are controlled by an automatic timer (0-24 hrs) fitted to the unit. It is fitted with DIGITAL SPEED METER (RPM COUNTER) for shaking platform having VARIABLE SPEED The shaker has variable speed and a platform containing accessory. To work on 220/230 volts A.C. supply a) Temp. range from 5 degree c above ambient to 50 degree c. b) Temp range from 5 degree c to 50 degree c.

OPTIONAL ACCESSORIES: a) Additional non-shaking tray(Made of S.S.) b) Built-in-U.V. germicidal tube light c) Automatic voltage stabilizer 3.0 KVA .

Download PDF